How to Remove Doors from a 2016 Jeep Wrangler
Ever wanted to remove your doors from your 2016 Jeep Wrangler to enjoy that classic open-air driving experience? Whether you're planning to go off-roading or just want to give your Jeep a unique look, this guide will walk you through the process step-by-step. Let's dive right in! First, you'll need to gather some tools: a socket wrench, a flathead screwdriver, and some patience.
Before you begin, make sure to give your doors a good clean. Grease and dirt can make removal more difficult and potentially damage your paint job. Also, ensure you have a safe place to store your removed doors. Now, let's start with the front doors.
Removing the Front Doors
The front doors on a 2016 Jeep Wrangler are held in place by four bolts. Three of these are located inside the door, while the fourth is hidden behind the dashboard.



The dashboard bolt is the most challenging to reach, so we'll tackle that first. Use your flathead screwdriver to carefully pry off the plastic cover near the bottom of the dashboard on the driver's side. You should see a 13mm bolt. Loosen and remove it using your socket wrench. Now, let's move on to the inside bolts.
Removing the Inside Bolts
Start by opening the door all the way, then remove the interior door panel. To do this, use your flathead screwdriver to pry off the plastic cover at the bottom of the door. You'll then see three screws. Remove these and the interior panel will come off, exposing the inner workings of the door.



The three bolts you need to remove are located here. They're 10mm in size. Loosen and remove these bolts. With the inside bolts taken care of, the door should now come off easily. However, don't try to remove it just yet. We still have one more bolt to deal with.
Removing the Outer Bolt
The outer bolt is hidden behind the door hinge. You'll need to remove the hinge itself to access this bolt. Use your socket wrench to remove the two bolts holding the hinge in place. Once the hinge is off, you should see the last 10mm bolt. Remove it, and now your front door can finally come off.
Removing the Rear Doors
Removing the rear doors is similar, but with one major difference: they're held in place by four bolts on the inside and one hidden behind the taillight.






Let's start with the inside bolts. Just like with the front doors, you'll need to remove the interior door panel. The process is the same: pry off the plastic cover, remove the screws, and set the panel aside. You'll see four 10mm bolts holding the door in place. Remove these.
Removing the Hidden Bolt
The hidden bolt on the rear doors is located behind the taillight. You'll need to remove the taillight to access it. The taillight is held in place by two screws. Once the light is off, you'll see a 10mm bolt. Remove this, and now your rear door can come off.
The reinstallation process is simply the reverse of these steps. Make sure to double-check that all bolts are tightened securely after reassembly, and that's it! You've successfully removed the doors from your 2016 Jeep Wrangler.

Now, go enjoy that open-air driving experience. Just remember to keep your doors safe and secure when they're off your Jeep. Consider investing in door storage bags to protect them from dust and debris. Happy Jeep wrangling!"



