removing doors from jeep wrangler jl

Easy DIY: Remove Doors on Jeep Wrangler JL

By Michael Taylor
AD

Ever dreamt of transforming your Jeep Wrangler JL into a true open-air off-road beast? One of the most impactful modifications you can make is to remove the doors. This not only provides an exhilarating driving experience but also allows for easier egress and ingress during off-roading adventures. Here's a comprehensive guide on how to remove doors from your Jeep Wrangler JL, complete with tips, tools, and step-by-step instructions.

Before you embark on this exciting journey, it's crucial to understand that removing your Jeep's doors is a permanent modification. You'll need to invest in custom door skins or aftermarket half doors if you want to regain the factory look. Moreover, it's essential to consult your local regulations, as driving without doors might be illegal in certain areas.

The Benefits of Removing Doors from Your Jeep Wrangler JL

Despite the small inconveniences, there are numerous benefits to removing doors from your Jeep Wrangler JL:

AD
The Secret to remove Jeep Wrangler Doors #jeep #jeepwrangler #jeeplife
The Secret to remove Jeep Wrangler Doors #jeep #jeepwrangler #jeeplife
How to Remove 2018 Jeep Wrangler JL Doors!
How to Remove 2018 Jeep Wrangler JL Doors!
How to Remove Jeep Wrangler Doors | RealTruck
How to Remove Jeep Wrangler Doors | RealTruck
  • Enhanced Aerodynamics: With the doors off, your Jeep enjoys less wind resistance, leading to improved fuel efficiency and better handling at high speeds.
  • Improved Visibility: Without doors blocking your peripheral vision, you'll enjoy a wider field of view, which is particularly useful during off-road adventures.
  • Easier Access: Removing doors makes it simpler to jump in and out of your Jeep, especially when you're loading gear or navigating tricky terrain.
  • Unmatched Open-Air Experience: There's nothing quite like feeling the wind in your hair and the sun on your face while driving your Jeep.

Now that you understand the advantages let's dive into the process of removal. Keep in mind that this guide assumes you have basic mechanical knowledge and the right tools on hand. If you're a DIY novice, don't hesitate to seek help from a professional.

Tools Needed for Door Removal

Before you start, make sure you have the following tools and equipment:

How to Remove the 2018 Jeep Wrangler JL’s Roof, Doors, and Windshield
How to Remove the 2018 Jeep Wrangler JL’s Roof, Doors, and Windshield
How To Make Jeep Wrangler Doors Easy To Remove
How To Make Jeep Wrangler Doors Easy To Remove
a vehicle is parked in a garage with an orange lift on it's side
a vehicle is parked in a garage with an orange lift on it's side
  • Airlift or floor jack
  • ulai or long breaker bar
  • Socket wrench (14mm and 16mm sockets)
  • Torque wrench (ideally with a range of 50-120lb-ft)
  • F professora Maltli or flathead screwdriver
  • Ratchet strap
  • Originally looked appli ent bumper covers (if removing doors permanently)

Removing Doors from Your Jeep Wrangler JL

Follow these step-by-step instructions to safely remove the doors from your Jeep:

  1. Lift your vehicle using an airlift or floor jack and secure it with jack stands. Always use the specified jack points to prevent damage.
  2. Remove the fender liners by prying them off with a flathead screwdriver. They should come off relatively easily.
  3. Using a 14mm socket wrench, disconnect the hinge bracket bolts from the front and rear of the door. There are typically three bolts at each hinge point.
  4. Support the door with a ratchet strap, tying it to the vehicle's B-pillar to prevent it from falling once the last bolt is removed.
  5. Remove the remaining bolts, and carefully lower the door. You might need to wiggle it slightly to free it from the weatherstripping.
  6. Repeat the process on the other side to remove the second door.

If you're removing the doors permanently, proceed to the next section. Otherwise, you can skip ahead to reinstalling the fender liners and lower your Jeep.

AD

Permanently Removing Doors: Post-Door Steps

Removing doors from your Jeep Wrangler JL allows you to install custom door skins, half doors, or create a custom look. Here's how to prepare your Jeep after door removal:

Fixing Sagging Door Netting on Jeep Wrangler JL: Easy Removal Guide
Fixing Sagging Door Netting on Jeep Wrangler JL: Easy Removal Guide
Jeep Wrangler Tutorial: How to Remove the Doors
Jeep Wrangler Tutorial: How to Remove the Doors
how to remove stuck jeep wrangler doors easily with the help of an expert
how to remove stuck jeep wrangler doors easily with the help of an expert
Jeep wrangler hardtop removal
Jeep wrangler hardtop removal
Sky One-Touch with doors off at Washington Auto Show
Sky One-Touch with doors off at Washington Auto Show
Jeep Wrangler TJ Update #48
Jeep Wrangler TJ Update #48

Installing Custom Door Skins or Half Doors

Once your Jeep is doorless, you'll need to install custom door skins or half doors to protect the interior and maintain a modicum of security. Follow these steps to install your new doors:

  1. Paint or otherwise prepare your door skins or half doors according to the manufacturer's instructions.
  2. Align the new doors with the factory hinge points and mark the drilling locations.
  3. Drill holes in the marked locations, using a bit slightly smaller than the hinge bolts to ensure a snug fit.
  4. Install the new hinge brackets using the supplied hardware, ensuring they align properly with the factory hinge points.
  5. Install the doors and test the functionality of your new hinges.

Installing new hinges requires precision and patience, as the doors must swing freely without binding. Take your time and double-check your work for the best results.

AD

Installing Bumper Covers and Other Trim

To create a cleaner, more seamless look, you can install your Jeep's original applique bumper covers. These covers help protect the rocker panels and give your doorless Jeep a finished appearance:

  1. Remove the original bumper covers, if equipped, using a flathead screwdriver to pry them away from the vehicle.
  2. Mark the drilling locations for the new bumper covers, ensuring they align with the factory brackets.
  3. Drill holes in the marked locations, using a bit slightly smaller than the supplied hardware.
  4. Install the new bumper covers using the supplied hardware, ensuring they align perfectly with the factory mounting points.

With these steps complete, your Jeep Wrangler JL will be ready to hit the trails, looking and feeling like a true off-road beast. Embrace the wind in your hair and the sun on your face as you enjoy the ultimate open-air driving experience.

In the future, you might consider other modifications to further enhance your doorless Jeep, such as installing aftermarket half doors or custom door skins. Don't be afraid to experiment and make your Jeep truly one-of-a-kind. Happy off-roading!

AD
AD