IKEA Knapper Mirror Setup: Easy Steps
Looking to upgrade your space with a sleek and functional Standing Mirror? The IKEA Kaemper standing mirror is a top choice for its contemporary design and practicality. Here, we guide you through the IKEA Kaemper standing mirror assembly, ensuring a smooth and accurate process.
Before you begin, gather all the necessary tools and parts. The IKEA Kaemper comes with these components: the mirror panel, the base, the legs, wall screws (if mounting on the wall), and an assembly instruction leaflet. Additionally, you'll need a cordless drill, a screwdriver, and maybe a friend to help with the final adjustments.
Understanding the IKEA Kaemper Standing Mirror Components
The IKEA Kaemper mirror comprises two main parts: the mirror panel and the base with legs. Understanding these components will help you follow the assembly instructions accurately.



The mirror panel is a full-length mirror with an aluminum frame. The base consists of two side legs, a rear leg, and a stabilizing bar. It's made of powder-coated steel for sturdiness and durability.
Mirror Panel and Frame Assembly
Begin by carefully unpacking the mirror panel and frame. Ensure the protective film remains intact to prevent scratches. The frame is already attached to the mirror panel, so you won't need to assemble this part.



However, if you've received a damaged or incorrect item, contact IKEA customer service immediately for a replacement before proceeding.
Base and Legs Assembly
Start by attaching the rear leg to the base. Locate the hole at the center of the base and the corresponding hole on the rear leg. Insert the provided bolt and washer through the leg, then screw it into the base using the provided nut. Tighten securely but avoid over-tightening.
Next, attach the side legs. Each side leg has a slot that fits onto the stabilizing bar at the base. Align the slot with the bar and push the leg into place. Secure each side leg by screwing in the provided bolts. Repeat the process for the other side leg.



Attaching the Mirror Panel to the Base
Now that the base and legs are assembled, it's time to attach the mirror panel. Locate the four holes on the frame that correspond to the holes on the base.
With a helper's assistance, carefully align the mirror panel over the base. Insert the provided bolts through the base holes and into the frame holes from below. Secure with washers and nuts, tightening gently but firmly.
Mounting the IKEA Kaemper Mirror on the Wall (Optional)
For added security and to prevent tipping, you can mount the IKEA Kaemper on the wall. First, ensure your wall can support the mirror's weight. Studs are usually the best anchor points.
Using a cordless drill, mark and drill pilot holes into the wall at the provided points on the base. Align the mirror with the wall, insert the wall screws, and tighten. Ensure the mirror is level and secure before letting go.
Congratulations! You've successfully assembled and mounted your IKEA Kaemper standing mirror. With its sleek design and practical functionality, it's sure to become a stylish focal point in your space. Enjoy your newly upgraded room!



