What to Do When Your Washer Won't Drain
Has your washer stopped draining as it should? This frustrating issue can disrupt your laundry routine, but don't worry, you're not alone, and more importantly, there are solutions. In this comprehensive guide, we'll explore common reasons why your washer won't drain and provide you with step-by-step solutions to get your appliance up and running again.
Before you call a professional or worse, throw out your washer, try these simple, yet effective troubleshooting methods. With a little elbow grease and some time, you may be able to solve the problem yourself. Let's dive in.
Inspect the Drain Hose
One of the most common reasons why a washer won't drain is a blocked or kinked drain hose. The drain hose is responsible for removing water from the washer, so if it's clogged or bent, water won't drain properly.



To fix this issue, follow these steps:
Check for Kinks
Locate the drain hose at the back of your washer. Trace it from the washer to the drain pump. Ensure it's not kinked or bent. If you find a kink, straighten the hose and check if the washer drains correctly.



Pro tip: Ensure the hose is not too tight against the washer and the wall or other appliances. This can cause kinks over time.
Inspect for Clogs
If there are no kinks, the next step is to check for clogs. Over time, lint, hair, and other debris can build up in the drain hose, causing blockages. To clean the hose:
- Disconnect the hose from the washer and the drain pump.
- Straighten the hose and run water through it to flush out any debris.
- Reconnect the hose and test the washer to see if it drains correctly.
Examine the Drain Pump
If the drain hose is clear and free of kinks, the issue might lie within the drain pump itself. The drain pump is responsible for moving water from the washer to the drain hose. If it's clogged or faulty, your washer won't drain.






To troubleshoot the drain pump:
Check for Blockages
Just like the drain hose, the drain pump can accumulate lint and debris, causing it to malfunction. To clean the pump:
- Turn off the washer and unplug it from the power source for safety.
- Locate the drain pump at the bottom of the washer (consult your washer's manual if needed).
- Remove the drain pump cover and use a cloth or small brush to clean any visible clogs.
- Reassemble the pump and test the washer to see if it drains correctly.
Test the Drain Pump
If cleaning the pump doesn't solve the issue, the pump might be faulty. To test the drain pump:

- Use a multimeter to check the pump's continuity. If there's no continuity, the pump is faulty and needs to be replaced.
- If the pump has continuity, the issue might lie in the pump's motor. In this case, it's best to consult a professional for repairs.
Inspect the Drain System
Sometimes, the issue might not be with your washer but with your home's drain system. A clogged or blocked main drain can prevent your washer from draining properly.
To troubleshoot your home's drain system:
Check for Clogs in the Main Drain
If your washer and other drains in your home are slow to drain or backing up, you might have a clog in your main drain. To clear the clog:
- Use a plunger to try and dislodge the clog. If this doesn't work, use a snake to clear the drain.
- If the clog is particularly stubborn or located further down the pipe, you may need to call a plumber.
Ensure the Standpipe is Correctly Installed
The standpipe is a pipes that extends from the floor drain to above the top of your washer's drain hose. If the standpipe is too short, water can siphon back into your washer, preventing it from draining correctly. Ensure the standpipe extends at least 30 inches above the floor and 2 inches above the top of the washer's drain hose.
Regular maintenance can prevent most drain issues. Remember to clean the lint trap in your washer after each use and inspect the drain hose and pump periodically. By keeping your washer clean and well-maintained, you'll ensure it runs smoothly and efficiently for years to come.
If none of the above solutions work, it's best to consult a professional. Appliance repair technicians have the knowledge and tools to diagnose and fix complex washer issues. Don't DIY if you're not completely confident, as improper repairs can lead to further damage and costly repairs.
In many cases, a washer that won't drain can be fixed with simple troubleshooting methods. Don't stress, just troubleshoot. With a little patience and these detailed steps, you'll have your washer back up and running in no time. Happy washing!





